‘nids part 245 – Biotitan Tyranid Hierophant pt.2 – washes

I think I may have been a little optimistic about this as even the simple things seem to be taking a bit longer than I imagined. The washes in particular are time consuming as I need to allow certain parts to dry before I paint the remainder. The last thing I want is massive pools of wash in the wrong place or dripping on my already messy workspace! So the torso is done, the tail needs finishing.

Front legs and bio-plasma cannons.

Back legs, now you should be able to see the lower leg has both Soft and Strong Tone washes on the Chitin plates [sepia and Agrax]. The upper leg only has Soft tone. This gives extra depth to the underlying blue, but it does mean I’ve gone through at least one bottle of each wash!

This is the carapace after just the Soft tone wash, you can see how messy it is but that’s nto a problem as it only serves as an ‘interference pattern’ behind the eventual turquoise highlights. I’ll probably be doing green toxic plasma glow on all the vents.

I’ve kept the log of my efforts so far but haven’t typed it up/photographed it but I will as it’s reasonably interesting. I often get asked how long things take to do so its nice to have a major benchmark to record, even if it’s an extreme project.

Part 1. |

Deatwatch Overkillin’

I finished all the Deathwatch Overkill boxset [except the 2 Purestrains] quite a while back but never had the chance to play since. Luckily I bullied Ben in to having a go, he really likes the Deathwatch Marines I did so I didn’t have to twist his arm too much. We started off the first mission, which I still believe you have to be some kind of special unlucky to lose as the Marines. I think he chose a couple of guys at random and some just because he liked the models but his squad was:

  • Jetek Suberei – White Scar biker
  • Ennox Sorrlock – Iron Hands combi-melta
  • Edryc Setorax – Raven Guard, jump pack and lightning claws
  • Garran Branatar – Salamander Termintaor with Flamer, Melta-gun and power fist

The Free Radical Collective emerged from the bowls of the underhive.

Interestingly discovered these are open gantries, not enclosed rooms as PeteB and I always played – so no LoS blocking walls!

Deathwatch attack and I lose all but 3 hybrids in the middle of the board.

Jetek surges ahead to confront the cult deep in their territory.

But he had been lured into an ambush as two Abberants surged out of the gloom. Jetek struck one of them dead but couldn’t kill them both.

I had a gambit that allowed models to strike twice, which was sufficient to put the White Scar down through weight of attacks.

Branatar and Setorax had struggled to keep up with their watch brother, covering their rear.

Having killed the biker the cultists advanced to add weight of number against the three remaining Marines.

And yet more cultists appeared from the hive.

The Kill team had to respond

Branatar’s flamer immolating four in one blast of holy Promethium. Meanwhile an Abberant skulked off into the network of tunnels to ambush the squad when and where they least expected.

The cultists that survived continued to press the 3 marines in an attempt to swamp them. Two Abberants appeared next to Ennox Sorrlock and Setorax, but Setorax was attacked from his flank as a third Aberrant appeared from the tunnels.

Setorax was able to counter the newly arrived Abberant and further kills ensured that the Kill Team met their target of 30 dead cultists.

It’s difficult to convey but this was in the balance at one stage. Although I hadn’t played in a while I was quick to suss how some of the Gambits could work quite well and used them to great effect – overwhelming Jetek Suberei for instance but Ben brought it back at the end as my cultists sold their lives cheaply.

With his eye in we set up mission two to control the four vox devices oin the top right board. Ben chose a new Kill Team of:
  • Garran Branatar – Salamander Termintaor with Flamer, Melta-gun and power fist
  • Ortan Cassius – Ultramarine Chaplain
  • Rodricus Grytt – Imperial Fist, Frag Cannon
  • Drenn Redblade – Space Wolf, chainsword
  • Zameon Gydrael – Dark Angel Plasma Pistol and Power Sword
  • Antor Delassio – Blood Angel, Jump Pack, chainsword and hand flamer

With seven cards to draw and five to play my ambush looked pretty impressive first turn.

Bu tthe Kill Team was more than ready as the moved forward to secure their hive section.

All the ambushes in their deployment were wiped out.

But some long range speculative fire was able to take down Rodricus Grytt and remove the Frag Cannon from play.

The squad advanced deeper into the hive and on towards their objective.

The Vox Controls were guarded by two Abberants and hybrids but I had to stall their advance and moved the Aberrants forward.

These beasts were backed up by a Purestrain Genestealer and yet more Hybrids as they attacked the squad, which had just leapt the chasm between the gantries [while Branatar arrived via teleport].

With further support moving in to the Vox room to defend the controls. Meanwhile a pair of Hybrids shadowed the Kill Team on the far side of the gantries and more cultists arrived from the Deathwatch deployment zone.

With brutal efficiency the Deathwatch purged the Xenos, Chaplain Cassius inciting new levels of violence in his squad.

With their path clear the Kill Team deployed into the Vox room. Two more Aberrants and two Purestrains rushed to prevent them controlling the Vox, they surged forwads and the attack twice gambit allowed them to take down the Blood Angel.

But he was quickly replaced by Brannatar and all my heavy hitters were destroyed, with my next round of ambushes being mainly Elites – the Magus and Primus. The Magus managed to cast Dominion on Branatar, rmeoving his potent flamer from combat. Meanwhile an Abberant reached the fray thanks to a double move Gambit that put Drenn Redblade in the meat grinder.

With the third squad member dead there was no way Kill Team Cassius could complete their mission to control all four Vox and the game was over.

Ben was really unlucky to use Rodricus Grytt so early on, without that casualty he would probably have made it. It’s also worth noting when the 2 Purestrains came on I had another ambush for a third, now you only get 2 Purestrains in the box but obviously I’ve loads of Genestealers so we initially had the third one come on but their efficacy was unreal and would have wiped out two squad members in one turn, so it was easy enough to pretend it never happened, rewind and stick to the units you get in the box in future.

Anyway, Ben liked it so hopefully we’ll continut the missions next time.

‘nids part 244 – Biotitan Tyranid Hierophant pt.1

I don’t know if I’m deluding myself but right now this beast seems really easy to do. I started with the bio-cannons. I think that was just half an hour’s work to get the Bonewhite on the arms. Then I did the legs. I am actually going to note down the rough painting time as I think it’ll be far less than you would expect

Front legs are also ‘boned’ up

And this is the slightly more difficult stage, picking out all the torso ribs and the tail is also done. can’t wait to get onto the blue areas so it can start coming together. I’m pretty sure the washes will be a challenge so that it’s not dripping everywhere.

Then I’ll be doing the black claws and spikes but will also shade the Razorback. This is just a diversion from the Razorback at the moment. I know where my muse is and I’m going with it but the Razorback is definitely something that will be finished alongside this. As I began this seems easy but I’m well aware that when I start those chitin highlights I will get very bored and the Razorback will be a suitable escape so I don’t go too crazy.

Forgebane

My order of Forgebane has just arrived, along with some industrial sized pots of Valejo Black and Sepia Wash! You’ll have already seen some unboxings and reviews online but I thought I’d just share mine.

Dark Angels – Tanks – Razorback glazing

With the Samurai complete this was the main project I have that’s outstanding, not entirely true as you’ll see but the most complete and therefore the easiest to finish. Glazing was the next task and once again I considered using the unmixed Valejo Dark Green but for consistency I resorted to two coats of Citadel’s Waywatcher Green Glaze to enrich the Waaargh Flesh.

With the green now correct the next step is to add some shading back in to increase the contrast and bring the dark to my Dark Angels. Now I know this is a one or two session process at the most but for some reason I’m avoiding that next step. I’ve sepia washes of the bronze still to do, detailing [rivets, badges, purity seals etc], verdigris, some extra highlights of the green and battle damage.

So not a significant amount left – one to two weeks work but I’m just not feeling it. You can see that the two tanks are matching up [the shading will help unify them] and it’ll be great to have them both complete.

What I’m going to do is just take it slow. Concerted effort and trying to push through will complete it but I really don’t want to end up hating the process. Luckily I have another project just come ‘online’ I can misdirect with, by doing some base coats and then when the slow progress on the Razorback is eventually complete I can jump whole-heartedly into that.

Citadel Samurai c1984 TO DONE!

I must confess [I must because it’s the name of the blog!] I chickened out over this guy. Flushed with the success and sense of achievement completeing my old skool Predator I was convinced painting this original Citadel Samurai from around 1984 would fill me with a huge sense of nostalgia and pride.

But as the ‘Eavier Metal painting challenge deadline came to a head I ‘rushed’ his completion. That is I didn’t do my absolute best and he probably deserved better. Don’t get me wrong I think I aced the eyes [for me] but the base, in particular the highlights around the text, the blending on the pants and some other compromises failed to deliver the same feeling of success.

However, he’s far better than the original Humbrol attempt I did nearly 30 years ago.

I think the highlights on the skin came out OK too, I tried to paint the lips differently but they came out really odd looking. It actually still needs varnishing and I’ll be glossing the scabbard and base.

I even tried to differentiate the hamon of the blade a little, creating the pattern made by the clay that’s applied during the forging process. It’s not great but I tried.

So another little success and another Great Big Gamboge Stamp of Approval.

Let your creativity be recorded

 
The BBC has teamed up with University College London to run the Great British Creativity Test. I’d seen the link a few times and then suddenly realised ‘hey I’m creative, I paint toy soldiers every night’. It’s rather sad how I didn’t really relate my day job as a graphic designer in any of the questions regarding creativity but mainly answering in my hobby capacity, plus my two visits to the Southport Floral Hall Rock Nights [dancing, of a sort] and my daily blogging [creative writing] I ended up in the top 5%.
 
As we’re all creative in the hobby I think it’s worth having a go in the interest of science [its not one of those silly facebook polls] here’s the direct link

Dark Angels – Tanks – Predator – Moar pics

I occassionally question the validity of taking these ‘moar’ shots but the Veliva filter often helps create the pictures I use most often to share what I’ve done on forums and social media.

I love the richness and high contrast, I can never quite tell which is the most accurate representation of the model, but these pics definitely made my Predator look cool.

Which might suggest these aren’t the most representative of colours…

Regardless I love the results.

And I love the tank too. I perhaps would have liked some form of spiked ram at the front. Not sure where the original ended up. It’s fine without and I think the weathering on that leading edge is ‘neat’ but I just envisage these with something to run folk over with 😉

Company badge again was well executed. I could have gone with the stick on disc but I actually like how I’ve managed to make soemthing that could almost be a decal. If anyone ever asks then I’ll know the effort was justified.

Again the laser lenses just came out so well. They totally look like those glass electricity insulators and add that touch of colour.

The rear drop pod Chapter symbol – it does the job. The big number 5 though, yummy

Rear lights, perhaps could have done the two outer ones as indicators, which would have amused me.

Anda a minimal amount of devotional script and litany, just to break up the expanse.

And the slightly more understated verdigris, in the darker turquoise just seems right.

The Heavy Support symbol is OK, probably the least convincing addition for me but I don’t dislike it.

I’m pleased I didn’t go too OTT with the scratches and weathering, certainly not like Euronymous.

It’ll be cool to have this on the battlefield but I suspect it won’t last long against Ben’s own armoured division, sadly.

But love the fact it just looks like a WWII tank, which suggests I should probably be playing Bolt Action with them!

And the Camera360 pics on a white background, giving a different green altogether, make of these what you will…

Next up will be my 1984 Citadel Samurai, completed for the ‘Eavier Metal Facebook group competition. It’s far from winning standard but I just wanted to join in. Then its my old skool/nu skool Razorback and then time to take stock…

Dark Angels – Tanks – Predator – TO DONE!

It’s extremely difficult to express the feeling I got from completing this original Predator. Interestingly it’s only really at the end that I felt so moved by the fact this 25+ year old model has finally been painted.

I can’t recall whether it was late 80’s or early 90’s I picked this up but aroudn that time my Mum and Dad had a caravan and we would regularly have trips away. I recall this being purchased on one of those trips.

I have a vivid memory of opening it up in the back of the car as we drove around somewhere, possibly in Wales. I think we’d been to some shopping centre and I’d hunted down the nearest GW or hobby shop so I could make a purchase.

Now it’s complete, so many years later and although the textured paint effect looks both wholly appropriate and also like I don’t thin my paints and just slapped it on thick on top of an existing paint job I’ve somehow come to terms with it because it’s complete.

And aside from that issue I think the result is pretty good. Perhaps a bigger Chapter symbol would have been nice, the very small ones seem a little understated but also makes my armoured ‘wing’ stand out a little more.

I also toned down the patina and the las-cannon lense coils just came out so well with the Tamiya Clear Red X-27.

I’m just so pleased with it that although I like the current pattern of Rhino/Razorback/Predator I can’t imagine anything but original Deimos on my Dark Angels army.

Thanfully I’ve another Razorback to finish and the ‘Crayola’ Whirlwind.

I doubt I’ll repaint my ‘Number 13′ Rhino as I just don’t see the point at this stage. Fitting these tanks into my army is a challenge already so one complete 2018 Rhino/Razorback should be enough for my current needs.

Anyway, here are all the white background shots just to look at, no more chat.

And the Great Big Gamboge Stamp of Approval for a job well done.

Blog at WordPress.com.

Up ↑

Design a site like this with WordPress.com
Get started